Bob's Flags Patented Unwrapper® Banner Pole is produced in our North Carolina facility. Replacement parts are available for long life of your pole. Bob’s Flags produces the Patented Unwrapper® Banner Poles in our North Carolina facility.  Replacement parts are available for long life of your pole.

• Made from either silver aluminum or white fiberglass, the poles provide long lasting service without warping or swelling.

• While both will give you long lasting service, we recommend the light weight silver aluminum pole when you need to use a ladder to change your flag. The white fiberglass is the choice for salt water area use.

• Each pole comes with a full length white non-furling Unwrapper® tube to prevent the flag from tangling around the pole and a traditional wood ball finial.

• Flags can be stored on the Unwrapper® tubes making changeover as simple as sliding one tube off and the next one on. This also avoids folds in storage which weaken the threads over time.

• The poles work with either sleeved banners or grommeted flags (when attached w/ nylon ties).

• 5’ is the recommended length for home use, although if flying a 3x5’ U. S. Flag only, you may prefer the 6’ length.

• The Unwrapper® tube can be purchased singly or in groups of 4 for replacement or storage and the wood ball finial can be replaced when wear warrants.

White Powdered Coated Aluminum Bracket

• Holds all 1” banner poles.

• Adjusts to thirteen positions.

• When teamed with Bob's Flags Patented Unwrapper® Banner Pole, our pole set allows the homeowner to fly the U. S. Flag and U. S. Banners easily at the proper 45 degree angle.

• All of our decorative flags display best at an angle slightly above horizontal.

• Specialty flags can be flown at the angle they require.

• Has slots for mounting to columns or poles with concave back for close fit.

• Includes built in windsock pole holder for ¼” Fiberglass Windsock Poles.