Bob's Flags
Go>>

Avenue Banner Poles

Avenue Banner Poles

Avenue Banner Poles hold your banner securely to the any size light pole.  Banner poles are bought in single banner sets for one banner per pole (two brackets for top and bottom securing) or a double banner set up on each lightpole for two banners per pole (four brackets for top and bottom securing). 

 

We offer our Deluxe Avenue Banner Pole sets for banners that are typically 17” to 30” wide x 54” to 96” in length. Each single banner display set consists of the following items:

·        Two "non rust” heavy-duty cast aluminum brackets (four brackets in a double banner display.

·        Two 7/8” fiberglass rods that are cantilevered 2 degrees to help keep banner taut and are aluminum tipped on the end that goes into the bracket to prevent wear. (four fiberglass rods in double banner display).

·        Two stainless steel rod pins to secure the fiberglass rod to the cast aluminum brackets (four rod pins in double banner display).

·        Two tywraps that allow you to secure you banner to the bracket utilizing the hole in the casting (four tywraps for double banner display).

·        Six stainless steel bands for silver brackets used to secure bracket to the pole (same amount of bands for double banner display).

 

Our Economy Avenue Banner Pole sets are for banners that are typically 17” to 30” wide and up to 60” in length. The minimum order for the Economy brackets is 4 sets, more sets can be ordered in quantities of 2.  Each single banner display set consists of the following items:

·        Two cast aluminum brackets (four brackets in a double banner display.

·        Two 3/4” fiberglass rods that flex with the wind (four fiberglass rods in double banner display).

·        Two stainless steel rod pins to secure the fiberglass rod to the cast aluminum brackets (four rod pins in double banner display).

·        Two tywraps that allow you to secure you banner to the bracket utilizing the hole in the casting (four tywraps for double banner display).

·        Six stainless steel 27” bands to secure bracket to the pole (same amount of bands for double banner display).
 

 

The other consideration that you need to keep in mind when ordering an Avenue Banner Pole Set is the length of the fiberglass arm needed in relationship to the banner width.  The banner arm length should be 3” longer than the banner width to allow for insertion into the bracket nozzle.  Therefore, a 17” wide banner needs a 20” fiberglass arm length; a 23” wide banner requires a 26” fiberglass arm; and a 30” wide banner requires a 33” fiberglass arm.  The standard size fiberglass arm is 33” for a 30” banner width, but the rod length can be cut to any length that is required.  You can do it yourself or we can have it cut for you.  Our "set” sizes below indicate the width of the banner that will fit on them; not the total length of the arm.
 
Call for quantity discounts of six or more bracket sets.  The Deluxe brackets can be special ordered with the bracket and stainless steel strap powder coated in black.  800.352.4766 or sales@bobsflags.com.
 
 

 

The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
View - Checkout

Customer Account:

Affiliate Account:

800-352-4766 
Rapid SSL